jaspscan |
An output file is written with information on the matches, including sequence ID and accession number, the start and end positions of the match in an input sequence and the sequence of the region where a match has been found. Binding factor information, where available, is given at the end of the matches for each matching entry.
% jaspscan -both Scans DNA sequences for transcription factors Input nucleotide sequence(s): tembl:m23100 Jaspar matrix set C : Core F : Fam P : Phylofacts N : CNE O : POLII S : SPLICE Matrix set [C]: Comma separated matrix list [all]: ma0079 Threshold percentage [80.0]: Output report [m23100.jaspscan]: |
Go to the input files for this example
Go to the output files for this example
Standard (Mandatory) qualifiers: [-sequence] seqall Nucleotide sequence(s) filename and optional format, or reference (input USA) -menu menu [C] Matrix set (Values: C (Core); F (Fam); P (Phylofacts); N (CNE); O (POLII); S (SPLICE)) -matrices string [all] The name 'all' reads in all matrix files from the selected JASPAR matrix set. You can specify individual matrices by giving their names with commas between then, such as: 'ma0001,ma0015'. The case of the names is not important. You can specify a file of matrix names to read in by giving the name of the file holding the matrix names with a '@' character in front of it, for example, '@matrix.list'. Blank lines and lines starting with a hash character or '!' are ignored and all other lines are concatenated together with a comma character ',' and then treated as the list of enzymes to search for. An example of a file of matrix names is: ! my matrices ma0001, ma0002 ! other matrices ma0010 ma0032 ma0053 (Any string is accepted) -threshold float [80.0] If the matrix score is greater than or equal to this percentage then a hit will be reported (Any numeric value) [-outfile] report [*.jaspscan] Output report file name Additional (Optional) qualifiers: -exclude string The names of any matrices to exclude from the 'matrices' list. Matrices are specified in the same way as for the selection list. (Any string is accepted) -both boolean [N] If set then both the forward and reverse strands are searched Advanced (Unprompted) qualifiers: (none) Associated qualifiers: "-sequence" associated qualifiers -sbegin1 integer Start of each sequence to be used -send1 integer End of each sequence to be used -sreverse1 boolean Reverse (if DNA) -sask1 boolean Ask for begin/end/reverse -snucleotide1 boolean Sequence is nucleotide -sprotein1 boolean Sequence is protein -slower1 boolean Make lower case -supper1 boolean Make upper case -sformat1 string Input sequence format -sdbname1 string Database name -sid1 string Entryname -ufo1 string UFO features -fformat1 string Features format -fopenfile1 string Features file name "-outfile" associated qualifiers -rformat2 string Report format -rname2 string Base file name -rextension2 string File name extension -rdirectory2 string Output directory -raccshow2 boolean Show accession number in the report -rdesshow2 boolean Show description in the report -rscoreshow2 boolean Show the score in the report -rstrandshow2 boolean Show the nucleotide strand in the report -rusashow2 boolean Show the full USA in the report -rmaxall2 integer Maximum total hits to report -rmaxseq2 integer Maximum hits to report for one sequence General qualifiers: -auto boolean Turn off prompts -stdout boolean Write first file to standard output -filter boolean Read first file from standard input, write first file to standard output -options boolean Prompt for standard and additional values -debug boolean Write debug output to program.dbg -verbose boolean Report some/full command line options -help boolean Report command line options. More information on associated and general qualifiers can be found with -help -verbose -warning boolean Report warnings -error boolean Report errors -fatal boolean Report fatal errors -die boolean Report dying program messages |
Standard (Mandatory) qualifiers | Allowed values | Default | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
[-sequence] (Parameter 1) |
Nucleotide sequence(s) filename and optional format, or reference (input USA) | Readable sequence(s) | Required | ||||||||||||
-menu | Matrix set |
|
C | ||||||||||||
-matrices | The name 'all' reads in all matrix files from the selected JASPAR matrix set. You can specify individual matrices by giving their names with commas between then, such as: 'ma0001,ma0015'. The case of the names is not important. You can specify a file of matrix names to read in by giving the name of the file holding the matrix names with a '@' character in front of it, for example, '@matrix.list'. Blank lines and lines starting with a hash character or '!' are ignored and all other lines are concatenated together with a comma character ',' and then treated as the list of enzymes to search for. An example of a file of matrix names is: ! my matrices ma0001, ma0002 ! other matrices ma0010 ma0032 ma0053 | Any string is accepted | all | ||||||||||||
-threshold | If the matrix score is greater than or equal to this percentage then a hit will be reported | Any numeric value | 80.0 | ||||||||||||
[-outfile] (Parameter 2) |
Output report file name | Report output file | <*>.jaspscan | ||||||||||||
Additional (Optional) qualifiers | Allowed values | Default | |||||||||||||
-exclude | The names of any matrices to exclude from the 'matrices' list. Matrices are specified in the same way as for the selection list. | Any string is accepted | An empty string is accepted | ||||||||||||
-both | If set then both the forward and reverse strands are searched | Boolean value Yes/No | No | ||||||||||||
Advanced (Unprompted) qualifiers | Allowed values | Default | |||||||||||||
(none) |
ID M23100; SV 1; linear; genomic DNA; STD; HUM; 2085 BP. XX AC M23100; M32822; XX DT 06-JUL-1989 (Rel. 20, Created) DT 14-NOV-2006 (Rel. 89, Last updated, Version 10) XX DE Human insulin receptor (INSR) gene, exon 1, clones lambda-hINSR-(1-13). XX KW Alu repeat; insulin receptor. XX OS Homo sapiens (human) OC Eukaryota; Metazoa; Chordata; Craniata; Vertebrata; Euteleostomi; Mammalia; OC Eutheria; Euarchontoglires; Primates; Haplorrhini; Catarrhini; Hominidae; OC Homo. XX RN [1] RP 1-1933 RX PUBMED; 2911561. RA Seino S., Seino M., Nishi S., Bell G.I.; RT "Structure of the human insulin receptor gene and characterization of its RT promoter"; RL Proc. Natl. Acad. Sci. U.S.A. 86(1):114-118(1989). XX RN [2] RP 1-2085 RX PUBMED; 2210055. RA Seino S., Seino M., Bell G.I.; RT "Human insulin-receptor gene. Partial sequence and amplification of exons RT by polymerase chain reaction"; RL Diabetes 39(1):123-128(1990). XX DR EMBL-JOIN; M32972. DR TRANSFAC; R03068; HS$INSR_01. DR UniProtKB/Swiss-Prot; P06213; INSR_HUMAN. XX CC Draft entry and computer-readable sequence for [1] kindly submitted CC by G.Bell, 14-MAR-1990. XX FH Key Location/Qualifiers FH FT source 1..2085 FT /organism="Homo sapiens" FT /map="19p13.3-p13.2" FT /mol_type="genomic DNA" FT /dev_stage="foetus" FT /tissue_type="liver" FT /db_xref="taxon:9606" FT repeat_region <1..76 FT /rpt_family="Alu" [Part of this file has been deleted for brevity] FT /number=1 FT /note="alternative exon 1; G00-119-352" FT exon 1548..1923 FT /gene="INSR" FT /number=1 FT /note="alternative exon 1; G00-119-352" FT sig_peptide 1824..1904 FT /gene="INSR" FT /note="G00-119-352" FT intron 1924..>2085 FT /gene="INSR" FT /number=1 FT /note="G00-119-352" XX SQ Sequence 2085 BP; 417 A; 631 C; 702 G; 335 T; 0 other; agatctggcc attgcactcc agcctgggca acagagaaaa actccatcta aaaaaaaaaa 60 aaaaaaaaaa aaaaaacaga gagagagaga gagagagaga gaaggaaacg gaactggggg 120 gaggatttgc aaaaatatgg ttagggatgg cacttcagag atgaagccat cctggagtgt 180 tacgggcaag ggaaatgctg gggcaaagcc ccagaggcag gaataggttt ggcctgttgc 240 atgaacagtg ggtccagctc ctagcaaact gtttattgaa tgaaagaaga atgaatgcct 300 tgggtctagg gttgtgctgg gcgctttctt aagttttctt tcccgggtac ctccccagaa 360 ctggcatgca ggtattatta aacccattac acaagtgaaa ctggcccaga gacagaaaag 420 tccctggtcc aagaccacac aggagtgagg ggtggaggaa ccctcctccc attgagttct 480 ggctttccta tactgaaagc cccttcctct cctgcagtaa ggtaggtgga accgctgtcc 540 cgccttgttg gtgaatgtcg ttgctagact tcagacacat acaggctggt ctgctgaaaa 600 tcagagatgt ccacctgcgc cctattcgag gtctccggcg tcttctttgg cgtcgtcttt 660 gccctttcag aagcgtctgc acatttttcc aggtgtcatt tctccaactt gaacacaggg 720 agcgcactgg gcacgcgggc acgtggctgt ccccaggggc ctggcttggg tctcgcccct 780 gggccggggc gcacgcgcgg gcgggacatc tgggggcgcc cacgcgctct gggacgagtg 840 tcgctggcca ggcccggact gaggaaaggc gagtgagaca ctactcgcct ggggtgcaaa 900 atttaaggga gtgaaaaaaa aaaaaaaaga aagaaaccaa aaccacctcg agtcaccaaa 960 ataaacattt taatgcagta ttttttaaaa aatcaacagg aatcctccaa agcccactat 1020 gaacaaaata gcaaaatggt agagaaagga tctgtgccgc tgcgtcgggc ctgtggggcg 1080 cctccggggg tctgaaactg gaggagactc ggggctgtag ggcgcgcgga tctggggcgc 1140 gccctcggtc ccggcgcgcc cagggcctcc cgcgcggggc ccggcacagg gaggcgggga 1200 ggcgggcggg gcggggcggg accgggcggc acctccctcc cctgcaagct ttccctccct 1260 ctcctgggcc tctcccgggc gcagagtccc ttcctaggcc agatccgcgc cgccttttcc 1320 cgcggcccgc acggggccca gctgacgggc cgcgttgttt acgggccgga gcagccctct 1380 ctcccgccgc ccgcccgcca cccgccagcc caggtgcccg cccgccagtc agctagtccg 1440 tcggtccgcg cgtccctctg tcccggagcc cgcagatcgc gacccagagc gcgcggggcc 1500 gagagccgag agacagtccc gggcgcagcg cggagctccg ggccccgaga tcctgggacg 1560 gggcccgggc cgcagcggcc ggggggtcgg ggccaccacc gcaagggcct ccgctcagta 1620 tttgtagctg gcgaagccgc gcgcgccctt cccggggctg cctctgggcc ctccccggca 1680 ggggggctgc ggcccgcggg tcgcgggcgt ggaagagaag gacgcgcggc ccccagcgcc 1740 tcttgggtgg ccgcctcgga gcatgacccc cgcgggccag cgccgcgcgc tctgatccga 1800 ggagaccccg cgctcccgca gccatgggca ccgggggccg gcggggagcg gcggccgcgc 1860 cgctgctggt ggcggtggcc gcgctgctac tgggcgccgc gggccacctg taccccggag 1920 agggtgagtc tgggggcgcg ggcgtgggcg gggagcgccg cgatggggag aggaccccac 1980 ccaagccaaa atcgatcccc cgcttgtgga ctgagaaccc tccccagggg cggggggcgg 2040 tggccaggac ggtagctcct gcatcgcgta gggggagcgg gaagc 2085 // |
######################################## # Program: jaspscan # Rundate: Tue 15 Jul 2008 12:00:00 # Commandline: jaspscan # -both # -sequence tembl:m23100 # -matrices ma0079 # Report_format: seqtable # Report_file: m23100.jaspscan ######################################## #======================================= # # Sequence: M23100 from: 1 to: 2085 # HitCount: 18 # # Database scanned: JASPAR_CORE Threshold: 80.000 # #======================================= Start End Strand Score_Percent ID Name Species Class Supergroup Protein_Seq Experiment Source_PMID Info_Content Closest_Jaspar Closest_Transfac MCS_Score Built_From Sequence 117 126 + 82.143 MA0079 SP1 Homo sapiens ZN-FINGER, C2H2 vertebrate P08047 SELEX 2192357 9.719 . . . . gggggaggat 1191 1200 + 89.286 MA0079 SP1 Homo sapiens ZN-FINGER, C2H2 vertebrate P08047 SELEX 2192357 9.719 . . . . gaggcgggga 1203 1212 + 83.929 MA0079 SP1 Homo sapiens ZN-FINGER, C2H2 vertebrate P08047 SELEX 2192357 9.719 . . . . cgggcggggc 1208 1217 + 89.286 MA0079 SP1 Homo sapiens ZN-FINGER, C2H2 vertebrate P08047 SELEX 2192357 9.719 . . . . ggggcggggc 1213 1222 + 80.357 MA0079 SP1 Homo sapiens ZN-FINGER, C2H2 vertebrate P08047 SELEX 2192357 9.719 . . . . ggggcgggac 1704 1713 + 82.143 MA0079 SP1 Homo sapiens ZN-FINGER, C2H2 vertebrate P08047 SELEX 2192357 9.719 . . . . cgggcgtgga 1838 1847 + 82.143 MA0079 SP1 Homo sapiens ZN-FINGER, C2H2 vertebrate P08047 SELEX 2192357 9.719 . . . . ccggcgggga 1933 1942 + 82.143 MA0079 SP1 Homo sapiens ZN-FINGER, C2H2 vertebrate P08047 SELEX 2192357 9.719 . . . . ggggcgcggg 1945 1954 + 89.286 MA0079 SP1 Homo sapiens ZN-FINGER, C2H2 vertebrate P08047 SELEX 2192357 9.719 . . . . tgggcgggga 2027 2036 + 89.286 MA0079 SP1 Homo sapiens ZN-FINGER, C2H2 vertebrate P08047 SELEX 2192357 9.719 . . . . ggggcggggg 2032 2041 + 87.500 MA0079 SP1 Homo sapiens ZN-FINGER, C2H2 vertebrate P08047 SELEX 2192357 9.719 . . . . ggggggcggt 2034 2043 + 82.143 MA0079 SP1 Homo sapiens ZN-FINGER, C2H2 vertebrate P08047 SELEX 2192357 9.719 . . . . ggggcggtgg 1252 1261 - 80.357 MA0079 SP1 Homo sapiens ZN-FINGER, C2H2 vertebrate P08047 SELEX 2192357 9.719 . . . . gagggaggga 1304 1313 - 80.357 MA0079 SP1 Homo sapiens ZN-FINGER, C2H2 vertebrate P08047 SELEX 2192357 9.719 . . . . gcggcgcgga 1805 1814 - 80.357 MA0079 SP1 Homo sapiens ZN-FINGER, C2H2 vertebrate P08047 SELEX 2192357 9.719 . . . . agcgcggggt 1974 1983 - 89.286 MA0079 SP1 Homo sapiens ZN-FINGER, C2H2 vertebrate P08047 SELEX 2192357 9.719 . . . . tgggtggggt 2016 2025 - 80.357 MA0079 SP1 Homo sapiens ZN-FINGER, C2H2 vertebrate P08047 SELEX 2192357 9.719 . . . . ggggagggtt 2017 2026 - 87.500 MA0079 SP1 Homo sapiens ZN-FINGER, C2H2 vertebrate P08047 SELEX 2192357 9.719 . . . . tggggagggt #--------------------------------------- #--------------------------------------- |
EMBOSS data files are distributed with the application and stored in the standard EMBOSS data directory, which is defined by the EMBOSS environment variable EMBOSS_DATA.
To see the available EMBOSS data files, run:
% embossdata -showall
To fetch one of the data files (for example 'Exxx.dat') into your current directory for you to inspect or modify, run:
% embossdata -fetch -file Exxx.dat
Users can provide their own data files in their own directories. Project specific files can be put in the current directory, or for tidier directory listings in a subdirectory called ".embossdata". Files for all EMBOSS runs can be put in the user's home directory, or again in a subdirectory called ".embossdata".
The directories are searched in the following order:
The EMBOSS JASPAR transcription site files are stored in directory 'data/JASPAR/*' under the EMBOSS installation directory.
These files must first be set up using the program 'jaspextract'. Running 'jaspextract' may be the job of your system manager.
The data files are stored in the JASPAR directory of the standard EMBOSS data directory. The subdirectory names are:
Program name | Description |
---|---|
tfscan | Identify transcription factor binding sites in DNA sequences |